This chapter describes Fiber Distributed Data Interface (FDDI) messages. For information on message content and how to use the message, refer to the Introduction.
| FDDI.001 |
Level: UI-ERROR
Short Syntax: FDDI.001 setup_phase fld - bff unav nt network
Long Syntax: FDDI.001 setup_phase failed, no buffer available net network
Description: There were no iorbs available for an ioctl-type function such as starting the self-test or updating statistics. The net may be marked down.
| FDDI.002 |
Level: UI-ERROR
Short Syntax: FDDI.002 PLL error nt network
Long Syntax: FDDI.002 Elasticity buffer error detected net network
Description: There was an elasticity buffer overrun or underrun detected and the recovery sequence was started.
| FDDI.003 |
Level: CI-ERROR
Short Syntax: FDDI.003 tx fld nt network
Long Syntax: FDDI.003 Transmit failed on network network
Description: This message is generated when a FDDI packet is added to the transmit queue and the transmission fails.
Cause: Normal when there is no network connection.
Action: Check the network connection.
| FDDI.004 |
Level: CI-ERROR
Short Syntax: FDDI.004 rx fld nt network
Long Syntax: FDDI.004 Receive failed on network network
Description: This message is generated when a FDDI packet is received and it can can not be added to the receive queue.
| FDDI.005 |
Level: C-INFO
Short Syntax: FDDI.005 setup_phase, nt network
Long Syntax: FDDI.005 setup_phase, network network
Description: FDDI adapter initialization in progress. Prior to executing phase.
| FDDI.008 |
Level: P-TRACE
Short Syntax: FDDI.008 Trace FDDI frame
Long Syntax: FDDI.008 Trace FDDI frame
Description: FDDI packet tracing.
| FDDI.009 |
Level: P-TRACE
Short Syntax: FDDI.009 Rcvd pkt source_MAC -> destination_MAC nt network wi RIF ln RIF_length
Long Syntax: FDDI.009 Received packet from source_MAC to destination_MAC network network with RIF length RIF_length
Description: This message is generated when a FDDI packet with source routing information is received.
| FDDI.010 |
Level: P-TRACE
Short Syntax: FDDI.010 Txd pkt source_MAC -> destination_MAC nt network ln
Long Syntax: FDDI.010 Transmitted packet from source_MAC to destination_MAC network network length
Description: This message is generated when a FDDI packet is transmitted.
| FDDI.011 |
Level: P-TRACE
Short Syntax: FDDI.011 Rxd pkt source_MAC -> destination_MAC nt network ln
Long Syntax: FDDI.011 Received packet from source_MAC to destination_MAC network network length
Description: This message is generated when a FDDI packet is received.
| FDDI.012 |
Level: U-TRACE
Short Syntax: FDDI.012 unkn SNAP type type_code source_MAC -> destination_MAC nt network
Long Syntax: FDDI.012 Unknown SNAP type type_code from source_MAC to destination_MAC net network
Description: This message is generated when a frame with an unknown SNAP type (within organization code 000000) is received.
Cause: Host sending packets for unknown Ethernet type using SNAP.
| FDDI.013 |
Level: U-TRACE
Short Syntax: FDDI.013 unkn SNAP mfr cd number source_MAC -> destination_MAC nt network
Long Syntax: FDDI.013 Unknown SNAP manufacturer code number from source_MAC to destination_MAC net network
Description: This message is generated when a frame with an unknown organization code in the SNAP header is received.
Cause: Host sending packets for unknown proprietary protocol using SNAP.
| FDDI.014 |
Level: U-TRACE
Short Syntax: FDDI.014 unexp type frm LLC_control ssap source_SAP dsap dest_SAP source_MAC -> destination_MAC nt network
Long Syntax: FDDI.014 Unexpected type frame LLC_control, ssap source_SAP, dsap dest_SAP, from source_MAC to destination_MAC net network
Description: This message is generated when an unexpected 802.2 LLC frame type is received. Type may be I (information transfer) or S (supervisory).
Cause: Host attempting to make 802.2 type 2 connection to router.
| FDDI.015 |
Level: U-TRACE
Short Syntax: FDDI.015 unexp U frm LLC_control ssap source_SAP dsap dest_SAP source_MAC -> destination_MAC nt network
Long Syntax: FDDI.015 Unexpected U frame LLC_control, ssap source_SAP, dsap dest_SAP, from source_MAC to destination_MAC net network
Description: This message is generated when an unexpected 802.2 LLC U (unnumbered) frame type is received. (Only UI, XID, and TEST are supported.)
| FDDI.016 |
Level: U-TRACE
Short Syntax: FDDI.016 unkn SAP sap_number source_MAC -> destination_MAC nt network
Long Syntax: FDDI.016 Unknown SAP sap_number from source_MAC to destination_MAC net network
Description: This message is generated when a frame with an unknown destination SAP is received.
Cause: Host sending packets for unknown protocol identifier (SAP).
| FDDI.017 |
Level: U-TRACE
Short Syntax: FDDI.017 xid pkt source_MAC src sap source_sap nt network
Long Syntax: FDDI.017 XID packet received from source_MAC source sap source_sap net network
Description: The handler received an xid message.
| FDDI.018 |
Level: UI_ERROR
Short Syntax: FDDI.018 FC typ frame_control unex source_MAC -> destination_MAC nt network
Long Syntax: FDDI.018 Frame Control type frame_control unexpected from source_MAC to destination_MAC network network
Description: This message is generated when an unexpected FDDI FC (frame control) is received. (Only LLC is supported by the net handler).
| FDDI.019 |
Level: U-TRACE
Short Syntax: FDDI.019 odd RIF len source_MAC -> destination_MAC; pkt drpd nt network
Long Syntax: FDDI.019 odd RIF length from source_MAC to destination_MAC; packet dropped on net network
Description: The length byte in the RIF header was odd, which is illegal. The packet was dropped.
| FDDI.020 |
Level: U-TRACE
Short Syntax: FDDI.020 drop IPX pkt w/ encap_seen encaps - using encap_used encaps on int intnum
Long Syntax: FDDI.020 dropped IPX pkt with encaps encap_seen using encap_used on interface intnum
Description: This message is generated when an IPX packet is recieved with an encapsulation other than that which has been selected for this interface.
Cause: Normal for networks using multiple encapsulations on a single wire.
Action: None needed.
| FDDI.021 |
Level: U-TRACE
Short Syntax: FDDI.021 DN bd ln actual_length claimed_length source_MAC -> destination_MAC nt network
Long Syntax: FDDI.021 DECnet packet received with a bad length actual actual_length claimed claimed_length from source_MAC to destination_MAC network network
Description: A DECnet packet was received with a length field that was larger than the actual length of the packet.
| FDDI.022 |
Level: C-TRACE
Short Syntax: FDDI.022 test pkt source_MAC src sap source_sap nt network
Long Syntax: FDDI.022 Test packet from source_MAC source sap source_sap net network
Description: The handler received a test message.
| FDDI.023 |
Level: C-TRACE
Short Syntax: FDDI.023 Rsp pkt source_MAC src sap source_sap nt network
Long Syntax: FDDI.023 RESPONSE packet received from source_MAC source sap source_sap net network
Description: The handler received a response message.
| Panic fddialp |
Short Syntax: fddialp: Can't allocate fddi pernet structure
Description: Cannot allocate the network specific FDDI structure.
| Panic fddibprt |
Short Syntax: fddibprt: bad prot init
Description: An unsupported Network Layer protocol tried to initialize the FDDI handler.
Action: Contact customer service.
| Panic fddibreq |
Short Syntax: fddibreq: bad xmit rqst
Description: An unsupported protocol packet was given to the FDDI handler for transmission.
Action: Contact customer service.